Question: What are HVS-1C Heat Shrink Shielded Cable Splice Kit made of?Īnswer: Our Heat Shrink Shielded Cable Splice Kit are made of a multi-layered cross-linked polymeric double wall (shield and insulation), which ensures mechanical protection and thermal electrical conductivity. You can select which connector technology should be included in your kit since we manufacture and offer both types. Question: What type of connectors are included in TE's Raychem Heat Shrink Shielded Cable Splice Kit?Īnswer: Our Heat Shrink Shielded Cable Splice Kit can be used with both compression or shear bolt connectors for both copper or aluminum cables. When done properly, a splicing is entirely weather proof and lasts indefinitely outdoors.Question: Does TE offer installation training for TE's Raychem Heat Shrink Shielded Cable Splice Kit?Īnswer: Yes, our Raychem Heat Shrink Shielded Cable Splice Kit are part of our installation training program. Learn more about our training programs and schedules at TE.com/trainingcenter. When splicing a cable, always attach an RG6 cable to another RG6 cable and likewise for RG54. Connect each cable end to the barrel connector by gently inserting and tightening the collar on each side.

Step #4 – Connect with a Barrel ConnectorĮach cable end is male, while a barrel connector has female endings on both sides. Select the appropriate setting and insert the cable into the tool where it is marked to do so. A small amount of copper cable should extend past the end of each connector.Ī coaxial crimping tool should have settings for both cable types, RG6 and RG59. While being sure not to damage the inner copper wire, slide each connector onto its respective cable end. This should leave the insulator intact and bare, along with the copper wire. After stripping the cable and exposing the copper wire, fold the metal mesh back over the outer casing.

Coaxial cable strippers are designed to ensure that this does not happen, but precise measurements with a knife will work as well. When stripping the cable, be careful not to damage the innermost copper wire. It typically has a black outer vinyl jacket, a metal mesh layer (works as a shield), a white dielectric insulator inside the metal mesh layer, and the core copper conducting wire. 233 inches.Ī coaxial cable is constructed different from a typical cable. If the cable is unidentifiable, the simplest solution is to cut a piece off and bring it to the hardware store. Other types of coaxial cables exist as well, but they are all designed in the same basic way. Check the marking on the cable for its designation. A coaxial crimping device for the F connectorsīefore beginning, the user should determine the type of cable he/she has.A coaxial cable stripper (preferably) or a knife.They can be found at a local hardware store. A coaxial cable can be spliced with a minimal set of tools, but some of them are specialized.

Coaxial cable splice kit